ChargeFlow™ — Snap Your iPhone, Watch & Headsets Onto One Foldable Qi2 Stand
Charge iPhone, Watch & Headsets on One Magnetic Stand — Folds Flat for the Backpack
Stop plugging three things in every night. ChargeFlow™ snaps your iPhone, Apple Watch and Headsets onto a single Qi2 stand with N52 magnets — 15W to your phone, no nudging the puck around hunting for the sweet spot. Folds down to a 4-inch cube for the bag.
Three Cables, Three Outlets, Three Things to Forget Packing
Most desks have a Lightning cord, a watch puck, and an Headsets cable wrestling for the same outlet. By Friday it's a knot. Pull one cord and the other two come with it. Travel anywhere and you're zipping a tangle into the laptop sleeve.
➤ Snaps Onto Qi2 Magnets at 15W: Drop your iPhone — the N52 magnet ring locks it dead-center on the coil. No slide-off, no nudging it around looking for the charge sweet spot. Full 15W Qi2 speed, same as a MagSafe puck.
➤ All Three Devices, One Wall Plug: Phone at 15W, Headsets at 5W, Apple Watch at 3W — running off a single USB-C input. Frees up two outlets you were burning before, and you stop tripping over cords behind the nightstand.
➤ Folds Into a Cube That Fits a Laptop Sleeve: The watch dock and Headsets tray collapse flush against the phone stand. Tucks into a backpack pocket or hotel-room drawer without the bulk of a fixed dock.
The Magnetic Alignment That Ends the "Slide and Pray"
Older Qi pads forced you to scoot the phone around looking for the charge ring — and half the time you'd wake up to 40% because the alignment drifted overnight. Qi2's N52 magnet ring auto-centers the coil the moment your phone gets close. You'll feel the click. Charging starts in under a second, and the phone stays put even if you bump the desk.
Plain wireless pads top out around 5–7.5W on iPhones. ChargeFlow™ pushes the full 15W Qi2 spec, so an overnight top-up isn't an overnight commitment — it's done before you finish a movie.
Why Remote Workers and Frequent Flyers Keep ChargeFlow™ on the Nightstand
The pattern's the same every time: someone bought a $20 wireless puck, watched the phone slide off twice, woke up at 60%, and gave up on wireless. Then they tried a real Qi2 dock with N52 magnets — and the cable bowl on their desk hasn't been touched since. "Skeptical because my last wireless charger barely got me to 60% by morning — this one had everything full by 6am, and the magnet's strong enough I can lift the stand by the phone." — Daniel R.
Wake Up to Three Full Batteries — Without Touching a Cable
✓ Everything Topped Off by 6am: Phone, watch and Headsets all charged before the alarm — no more hunting for a Lightning cable in the dark.
✓ Folds Flat for the Backpack: 42mm + 57mm + 41mm modules collapse into a sleeve-friendly cube. One stand handles home, hotel, and the office desk.
✓ Built-In Overcharge & Heat Protection: Auto shut-off and temperature control kick in once devices hit full, so the iPhone battery doesn't bake at 100% all night.
Set It Up in 30 Seconds
Step 1: Plug ChargeFlow™ into any USB-C wall adapter (5V/3A or 9V/3A).
Step 2: Drop your iPhone onto the Qi2 ring — you'll feel the magnet click. Slide your Headsets case onto the front pad and clip your Apple Watch into the side dock.
Step 3: The blue indicator strip along the base confirms power is flowing. Walk away.
| ChargeFlow™ 3-in-1 Qi2 Station | Standard 3-in-1 Wireless Pads | Three Separate Cables |
|---|---|---|
| ✅ Full 15W Qi2 via N52 magnet ring — phone locks on, no alignment hunting | ❌ Older Qi caps at 5–7.5W on iPhones; phone slides off the spot | ❌ Three cords, three outlets, one tangled mess |
| ✅ Folds flat to a 4-inch cube — fits a laptop sleeve | ❌ Fixed-stand designs that don't travel | ❌ Pack three cables and a brick for every trip |
| ✅ One USB-C wall plug powers all three devices | ❌ Often need extra USB ports or proprietary bricks | ❌ Burns three outlets behind the nightstand |
| ✅ Auto shut-off + temp control protects battery health | ❌ Many cheap pads lack thermal protection | ❌ Phone trickle-charges at 100% all night |
Specs You'll Actually Care About
- Wireless Standard: Qi2 with N52 magnet ring (auto-aligns iPhone 12 and newer)
- Output: Phone 15W · Headsets 5W · Apple Watch 3W
- Input: USB-C, 5V/3A or 9V/3A
- Materials: PC, ABS and tempered glass — premium feel, no creaky plastic
- Weight: 9.9 oz — folds to a 4-inch cube for travel
- Compatibility: All Qi-enabled phones; Qi2 magnetic alignment for iPhone 12 and newer
Got Questions? Here's What You Need to Know
Will it actually deliver the full 15W to my iPhone?
Yes — when paired with a Qi2-capable iPhone (iPhone 12 and newer) and a 9V/3A USB-C adapter, ChargeFlow™ pushes the full 15W. Use a 5V/3A adapter and you'll get the standard 7.5W speed instead.
Does it work through my phone case?
It works through any non-metal case under 3mm thick. MagSafe-compatible cases hold the strongest. Thick wallet cases or anything with a metal plate will block the charge — pop the phone out for those.
Is a wall adapter included?
ChargeFlow™ ships with the USB-C cable but not the wall plug — most buyers already have a 20W+ USB-C adapter from their iPhone. To hit full 15W speed, use a 9V/3A or higher adapter.
Will my devices overheat overnight?
No. The auto shut-off switches to trickle mode once devices hit 100%, and the built-in temperature sensor throttles output if anything climbs too warm. Devices stay cool to the touch.
Will it work with my Samsung or Pixel?
Yes — any Qi-enabled Android phone charges at standard 7.5W speed. The N52 magnet ring is built for iPhone 12 and newer, so on Android phones you'll place the phone manually instead of clicking it onto the magnets.
Try ChargeFlow™ Risk-Free for 30 Days
Set it on the nightstand for one week. If your iPhone isn't charging at full Qi2 speed, if the magnet doesn't snap your phone into place, or if you're not waking up to three full batteries every morning — send it back for a full refund. No questions, no restocking fees. Clear your desk and pack one charger instead of three.
Charge iPhone, Watch & Headsets on One Magnetic Stand — Folds Flat for the Backpack
Stop plugging three things in every night. ChargeFlow™ snaps your iPhone, Apple Watch and Headsets onto a single Qi2 stand with N52 magnets — 15W to your phone, no nudging the puck around hunting for the sweet spot. Folds down to a 4-inch cube for the bag.
Three Cables, Three Outlets, Three Things to Forget Packing
Most desks have a Lightning cord, a watch puck, and an Headsets cable wrestling for the same outlet. By Friday it's a knot. Pull one cord and the other two come with it. Travel anywhere and you're zipping a tangle into the laptop sleeve.
➤ Snaps Onto Qi2 Magnets at 15W: Drop your iPhone — the N52 magnet ring locks it dead-center on the coil. No slide-off, no nudging it around looking for the charge sweet spot. Full 15W Qi2 speed, same as a MagSafe puck.
➤ All Three Devices, One Wall Plug: Phone at 15W, Headsets at 5W, Apple Watch at 3W — running off a single USB-C input. Frees up two outlets you were burning before, and you stop tripping over cords behind the nightstand.
➤ Folds Into a Cube That Fits a Laptop Sleeve: The watch dock and Headsets tray collapse flush against the phone stand. Tucks into a backpack pocket or hotel-room drawer without the bulk of a fixed dock.
The Magnetic Alignment That Ends the "Slide and Pray"
Older Qi pads forced you to scoot the phone around looking for the charge ring — and half the time you'd wake up to 40% because the alignment drifted overnight. Qi2's N52 magnet ring auto-centers the coil the moment your phone gets close. You'll feel the click. Charging starts in under a second, and the phone stays put even if you bump the desk.
Plain wireless pads top out around 5–7.5W on iPhones. ChargeFlow™ pushes the full 15W Qi2 spec, so an overnight top-up isn't an overnight commitment — it's done before you finish a movie.
Why Remote Workers and Frequent Flyers Keep ChargeFlow™ on the Nightstand
The pattern's the same every time: someone bought a $20 wireless puck, watched the phone slide off twice, woke up at 60%, and gave up on wireless. Then they tried a real Qi2 dock with N52 magnets — and the cable bowl on their desk hasn't been touched since. "Skeptical because my last wireless charger barely got me to 60% by morning — this one had everything full by 6am, and the magnet's strong enough I can lift the stand by the phone." — Daniel R.
Wake Up to Three Full Batteries — Without Touching a Cable
✓ Everything Topped Off by 6am: Phone, watch and Headsets all charged before the alarm — no more hunting for a Lightning cable in the dark.
✓ Folds Flat for the Backpack: 42mm + 57mm + 41mm modules collapse into a sleeve-friendly cube. One stand handles home, hotel, and the office desk.
✓ Built-In Overcharge & Heat Protection: Auto shut-off and temperature control kick in once devices hit full, so the iPhone battery doesn't bake at 100% all night.
Set It Up in 30 Seconds
Step 1: Plug ChargeFlow™ into any USB-C wall adapter (5V/3A or 9V/3A).
Step 2: Drop your iPhone onto the Qi2 ring — you'll feel the magnet click. Slide your Headsets case onto the front pad and clip your Apple Watch into the side dock.
Step 3: The blue indicator strip along the base confirms power is flowing. Walk away.
| ChargeFlow™ 3-in-1 Qi2 Station | Standard 3-in-1 Wireless Pads | Three Separate Cables |
|---|---|---|
| ✅ Full 15W Qi2 via N52 magnet ring — phone locks on, no alignment hunting | ❌ Older Qi caps at 5–7.5W on iPhones; phone slides off the spot | ❌ Three cords, three outlets, one tangled mess |
| ✅ Folds flat to a 4-inch cube — fits a laptop sleeve | ❌ Fixed-stand designs that don't travel | ❌ Pack three cables and a brick for every trip |
| ✅ One USB-C wall plug powers all three devices | ❌ Often need extra USB ports or proprietary bricks | ❌ Burns three outlets behind the nightstand |
| ✅ Auto shut-off + temp control protects battery health | ❌ Many cheap pads lack thermal protection | ❌ Phone trickle-charges at 100% all night |
Specs You'll Actually Care About
- Wireless Standard: Qi2 with N52 magnet ring (auto-aligns iPhone 12 and newer)
- Output: Phone 15W · Headsets 5W · Apple Watch 3W
- Input: USB-C, 5V/3A or 9V/3A
- Materials: PC, ABS and tempered glass — premium feel, no creaky plastic
- Weight: 9.9 oz — folds to a 4-inch cube for travel
- Compatibility: All Qi-enabled phones; Qi2 magnetic alignment for iPhone 12 and newer
Got Questions? Here's What You Need to Know
Will it actually deliver the full 15W to my iPhone?
Yes — when paired with a Qi2-capable iPhone (iPhone 12 and newer) and a 9V/3A USB-C adapter, ChargeFlow™ pushes the full 15W. Use a 5V/3A adapter and you'll get the standard 7.5W speed instead.
Does it work through my phone case?
It works through any non-metal case under 3mm thick. MagSafe-compatible cases hold the strongest. Thick wallet cases or anything with a metal plate will block the charge — pop the phone out for those.
Is a wall adapter included?
ChargeFlow™ ships with the USB-C cable but not the wall plug — most buyers already have a 20W+ USB-C adapter from their iPhone. To hit full 15W speed, use a 9V/3A or higher adapter.
Will my devices overheat overnight?
No. The auto shut-off switches to trickle mode once devices hit 100%, and the built-in temperature sensor throttles output if anything climbs too warm. Devices stay cool to the touch.
Will it work with my Samsung or Pixel?
Yes — any Qi-enabled Android phone charges at standard 7.5W speed. The N52 magnet ring is built for iPhone 12 and newer, so on Android phones you'll place the phone manually instead of clicking it onto the magnets.
Try ChargeFlow™ Risk-Free for 30 Days
Set it on the nightstand for one week. If your iPhone isn't charging at full Qi2 speed, if the magnet doesn't snap your phone into place, or if you're not waking up to three full batteries every morning — send it back for a full refund. No questions, no restocking fees. Clear your desk and pack one charger instead of three.
Original: $64.99
-70%$64.99
$19.50Description
Charge iPhone, Watch & Headsets on One Magnetic Stand — Folds Flat for the Backpack
Stop plugging three things in every night. ChargeFlow™ snaps your iPhone, Apple Watch and Headsets onto a single Qi2 stand with N52 magnets — 15W to your phone, no nudging the puck around hunting for the sweet spot. Folds down to a 4-inch cube for the bag.
Three Cables, Three Outlets, Three Things to Forget Packing
Most desks have a Lightning cord, a watch puck, and an Headsets cable wrestling for the same outlet. By Friday it's a knot. Pull one cord and the other two come with it. Travel anywhere and you're zipping a tangle into the laptop sleeve.
➤ Snaps Onto Qi2 Magnets at 15W: Drop your iPhone — the N52 magnet ring locks it dead-center on the coil. No slide-off, no nudging it around looking for the charge sweet spot. Full 15W Qi2 speed, same as a MagSafe puck.
➤ All Three Devices, One Wall Plug: Phone at 15W, Headsets at 5W, Apple Watch at 3W — running off a single USB-C input. Frees up two outlets you were burning before, and you stop tripping over cords behind the nightstand.
➤ Folds Into a Cube That Fits a Laptop Sleeve: The watch dock and Headsets tray collapse flush against the phone stand. Tucks into a backpack pocket or hotel-room drawer without the bulk of a fixed dock.
The Magnetic Alignment That Ends the "Slide and Pray"
Older Qi pads forced you to scoot the phone around looking for the charge ring — and half the time you'd wake up to 40% because the alignment drifted overnight. Qi2's N52 magnet ring auto-centers the coil the moment your phone gets close. You'll feel the click. Charging starts in under a second, and the phone stays put even if you bump the desk.
Plain wireless pads top out around 5–7.5W on iPhones. ChargeFlow™ pushes the full 15W Qi2 spec, so an overnight top-up isn't an overnight commitment — it's done before you finish a movie.
Why Remote Workers and Frequent Flyers Keep ChargeFlow™ on the Nightstand
The pattern's the same every time: someone bought a $20 wireless puck, watched the phone slide off twice, woke up at 60%, and gave up on wireless. Then they tried a real Qi2 dock with N52 magnets — and the cable bowl on their desk hasn't been touched since. "Skeptical because my last wireless charger barely got me to 60% by morning — this one had everything full by 6am, and the magnet's strong enough I can lift the stand by the phone." — Daniel R.
Wake Up to Three Full Batteries — Without Touching a Cable
✓ Everything Topped Off by 6am: Phone, watch and Headsets all charged before the alarm — no more hunting for a Lightning cable in the dark.
✓ Folds Flat for the Backpack: 42mm + 57mm + 41mm modules collapse into a sleeve-friendly cube. One stand handles home, hotel, and the office desk.
✓ Built-In Overcharge & Heat Protection: Auto shut-off and temperature control kick in once devices hit full, so the iPhone battery doesn't bake at 100% all night.
Set It Up in 30 Seconds
Step 1: Plug ChargeFlow™ into any USB-C wall adapter (5V/3A or 9V/3A).
Step 2: Drop your iPhone onto the Qi2 ring — you'll feel the magnet click. Slide your Headsets case onto the front pad and clip your Apple Watch into the side dock.
Step 3: The blue indicator strip along the base confirms power is flowing. Walk away.
| ChargeFlow™ 3-in-1 Qi2 Station | Standard 3-in-1 Wireless Pads | Three Separate Cables |
|---|---|---|
| ✅ Full 15W Qi2 via N52 magnet ring — phone locks on, no alignment hunting | ❌ Older Qi caps at 5–7.5W on iPhones; phone slides off the spot | ❌ Three cords, three outlets, one tangled mess |
| ✅ Folds flat to a 4-inch cube — fits a laptop sleeve | ❌ Fixed-stand designs that don't travel | ❌ Pack three cables and a brick for every trip |
| ✅ One USB-C wall plug powers all three devices | ❌ Often need extra USB ports or proprietary bricks | ❌ Burns three outlets behind the nightstand |
| ✅ Auto shut-off + temp control protects battery health | ❌ Many cheap pads lack thermal protection | ❌ Phone trickle-charges at 100% all night |
Specs You'll Actually Care About
- Wireless Standard: Qi2 with N52 magnet ring (auto-aligns iPhone 12 and newer)
- Output: Phone 15W · Headsets 5W · Apple Watch 3W
- Input: USB-C, 5V/3A or 9V/3A
- Materials: PC, ABS and tempered glass — premium feel, no creaky plastic
- Weight: 9.9 oz — folds to a 4-inch cube for travel
- Compatibility: All Qi-enabled phones; Qi2 magnetic alignment for iPhone 12 and newer
Got Questions? Here's What You Need to Know
Will it actually deliver the full 15W to my iPhone?
Yes — when paired with a Qi2-capable iPhone (iPhone 12 and newer) and a 9V/3A USB-C adapter, ChargeFlow™ pushes the full 15W. Use a 5V/3A adapter and you'll get the standard 7.5W speed instead.
Does it work through my phone case?
It works through any non-metal case under 3mm thick. MagSafe-compatible cases hold the strongest. Thick wallet cases or anything with a metal plate will block the charge — pop the phone out for those.
Is a wall adapter included?
ChargeFlow™ ships with the USB-C cable but not the wall plug — most buyers already have a 20W+ USB-C adapter from their iPhone. To hit full 15W speed, use a 9V/3A or higher adapter.
Will my devices overheat overnight?
No. The auto shut-off switches to trickle mode once devices hit 100%, and the built-in temperature sensor throttles output if anything climbs too warm. Devices stay cool to the touch.
Will it work with my Samsung or Pixel?
Yes — any Qi-enabled Android phone charges at standard 7.5W speed. The N52 magnet ring is built for iPhone 12 and newer, so on Android phones you'll place the phone manually instead of clicking it onto the magnets.
Try ChargeFlow™ Risk-Free for 30 Days
Set it on the nightstand for one week. If your iPhone isn't charging at full Qi2 speed, if the magnet doesn't snap your phone into place, or if you're not waking up to three full batteries every morning — send it back for a full refund. No questions, no restocking fees. Clear your desk and pack one charger instead of three.
