WallScout™ HW-710 — Spot Studs, Wires & Pipes Before You Drill | 5-Mode Scanner
Stop Drilling Blind. Start Drilling Smart.
Pinpoint studs, live AC wires, copper pipes, and rebar before your drill bit hits them. The WallScout™ HW-710 reads through drywall, plaster, and concrete so you know exactly what's behind the wall — no more praying, no more "I hope this isn't a wire."
5 Scan Modes In One Pocket-Sized Tool
One scanner. Four buttons. Five different things to find behind your wall. Switch modes with a single press and let the LCD tell you exactly where to stop drilling.
➤ Locks Onto Center, Not The Edge: The bar graph fills as you scan and snaps to "CENTER" the moment you're directly over a stud or pipe. Mark, drill, done.
➤ AC Live-Wire Alert Up To 51mm: A flashing warning and audible beep fire the second the sensor crosses an energized cable up to 2 inches deep. No more praying you missed the romex.
➤ Reads Wood, Metal & Rebar Separately: Three depth settings for wood (13mm, 25mm, 38mm) plus a dedicated metal mode that finds rebar, nails, and copper up to 38mm in concrete or drywall.
The Repair Bill You're About To Avoid
Every DIYer has a story about the wire they didn't see coming. Or the pipe. Or the rebar that snapped a $40 masonry bit. The HW-710 ends the guessing — sweep the wall, watch the bar, listen for the beep, and know what's there before metal meets surface.
"Hung my first floating shelf last weekend and the AC alarm went off right where I was about to drill. Pulled the cover plate off — live wire, two inches over. This thing paid for itself on the first hole." — Mark T.
Audio Beep + Bar Graph = Zero Second-Guessing
The HW-710 doesn't make you read tea leaves. The LCD bar fills as you approach a stud, locks onto "CENTER," and the speaker beeps the second you're dead-on. Even if your eyes are on the drill, your ears will hear it.
Why DIYers Trust The WallScout™ HW-710
✓ One Tool, Five Jobs: Replaces a stud finder, a live-wire detector, and a metal scanner — for the price of one.
✓ Reads Through Drywall, Plaster & Concrete: Works on standard interior walls and reinforced masonry up to 51mm deep.
✓ Pocket-Sized & One-Hand Operated: 15cm tall, 4 buttons, no app, no Bluetooth, no calibration menu — pull it out and scan.
Drill Holes With Confidence — On Every Surface
Mounting a TV bracket. Hanging a heavy mirror. Running a new outlet. Every job that ends with a drill in your hand starts with the same question: what's behind this wall?
The HW-710 answers it in three seconds. Press a button, glide it across the surface, watch the bar, mark the spot.
Then drill — knowing exactly what you'll hit, and what you'll never have to fix.
| Capability | WallScout™ HW-710 | Cheap Stud Finders |
|---|---|---|
| Detects Live AC Wires Up To 51mm | ✅ | ❌ |
| Wood + Metal + AC In One Tool | ✅ | ❌ |
| LCD Depth Read + Audio Beep + Center Lock | ✅ | ❌ |
What Makes The HW-710 Different?
- 5 Dedicated Scan Modes: ½" stud, 1" stud, 1½" stud, metal (38mm), and AC current (51mm) — switched with a single button.
- "CENTER" Lock Indicator: The bar graph snaps to center the instant you're over the target so you mark the right spot the first time.
- Triple-Alert System: LCD bar + percentage readout + audio beep — see it, read it, hear it.
- Built For Real Jobs: Rubberized side grip, recessed display, and a battery compartment that swaps in 30 seconds.
Drill Smarter, Not Riskier
Hang Anything, Anywhere
TVs, mirrors, shelves, art — find the stud, hit it dead-center, and skip the drywall anchors that pull out at 5kg.
Avoid Live Wires Before You Cut
Adding an outlet, running cable, fishing wire? AC mode flashes the warning before you commit a single hole.
Find Pipes Before The Flood
Metal mode picks up copper plumbing in walls and floors so a kitchen reno doesn't turn into an insurance claim.
Locate Rebar In Concrete
Drilling masonry? Find the rebar before it snaps your bit. Detection up to 38mm deep through concrete.
One-Hand Operation
15cm × 6.7cm × 3cm — fits in any tool pouch. Four buttons total. No app, no calibration, no learning curve.
Pick Your Color — Silver, Yellow, Or Red
Same scanner, three finishes. Choose your variant above and add to cart — every WallScout™ HW-710 ships with our 30-day "find it or refund it" guarantee. If the HW-710 doesn't catch what's behind your walls, send it back and we'll refund every cent.
Stop Drilling Blind. Start Drilling Smart.
Pinpoint studs, live AC wires, copper pipes, and rebar before your drill bit hits them. The WallScout™ HW-710 reads through drywall, plaster, and concrete so you know exactly what's behind the wall — no more praying, no more "I hope this isn't a wire."
5 Scan Modes In One Pocket-Sized Tool
One scanner. Four buttons. Five different things to find behind your wall. Switch modes with a single press and let the LCD tell you exactly where to stop drilling.
➤ Locks Onto Center, Not The Edge: The bar graph fills as you scan and snaps to "CENTER" the moment you're directly over a stud or pipe. Mark, drill, done.
➤ AC Live-Wire Alert Up To 51mm: A flashing warning and audible beep fire the second the sensor crosses an energized cable up to 2 inches deep. No more praying you missed the romex.
➤ Reads Wood, Metal & Rebar Separately: Three depth settings for wood (13mm, 25mm, 38mm) plus a dedicated metal mode that finds rebar, nails, and copper up to 38mm in concrete or drywall.
The Repair Bill You're About To Avoid
Every DIYer has a story about the wire they didn't see coming. Or the pipe. Or the rebar that snapped a $40 masonry bit. The HW-710 ends the guessing — sweep the wall, watch the bar, listen for the beep, and know what's there before metal meets surface.
"Hung my first floating shelf last weekend and the AC alarm went off right where I was about to drill. Pulled the cover plate off — live wire, two inches over. This thing paid for itself on the first hole." — Mark T.
Audio Beep + Bar Graph = Zero Second-Guessing
The HW-710 doesn't make you read tea leaves. The LCD bar fills as you approach a stud, locks onto "CENTER," and the speaker beeps the second you're dead-on. Even if your eyes are on the drill, your ears will hear it.
Why DIYers Trust The WallScout™ HW-710
✓ One Tool, Five Jobs: Replaces a stud finder, a live-wire detector, and a metal scanner — for the price of one.
✓ Reads Through Drywall, Plaster & Concrete: Works on standard interior walls and reinforced masonry up to 51mm deep.
✓ Pocket-Sized & One-Hand Operated: 15cm tall, 4 buttons, no app, no Bluetooth, no calibration menu — pull it out and scan.
Drill Holes With Confidence — On Every Surface
Mounting a TV bracket. Hanging a heavy mirror. Running a new outlet. Every job that ends with a drill in your hand starts with the same question: what's behind this wall?
The HW-710 answers it in three seconds. Press a button, glide it across the surface, watch the bar, mark the spot.
Then drill — knowing exactly what you'll hit, and what you'll never have to fix.
| Capability | WallScout™ HW-710 | Cheap Stud Finders |
|---|---|---|
| Detects Live AC Wires Up To 51mm | ✅ | ❌ |
| Wood + Metal + AC In One Tool | ✅ | ❌ |
| LCD Depth Read + Audio Beep + Center Lock | ✅ | ❌ |
What Makes The HW-710 Different?
- 5 Dedicated Scan Modes: ½" stud, 1" stud, 1½" stud, metal (38mm), and AC current (51mm) — switched with a single button.
- "CENTER" Lock Indicator: The bar graph snaps to center the instant you're over the target so you mark the right spot the first time.
- Triple-Alert System: LCD bar + percentage readout + audio beep — see it, read it, hear it.
- Built For Real Jobs: Rubberized side grip, recessed display, and a battery compartment that swaps in 30 seconds.
Drill Smarter, Not Riskier
Hang Anything, Anywhere
TVs, mirrors, shelves, art — find the stud, hit it dead-center, and skip the drywall anchors that pull out at 5kg.
Avoid Live Wires Before You Cut
Adding an outlet, running cable, fishing wire? AC mode flashes the warning before you commit a single hole.
Find Pipes Before The Flood
Metal mode picks up copper plumbing in walls and floors so a kitchen reno doesn't turn into an insurance claim.
Locate Rebar In Concrete
Drilling masonry? Find the rebar before it snaps your bit. Detection up to 38mm deep through concrete.
One-Hand Operation
15cm × 6.7cm × 3cm — fits in any tool pouch. Four buttons total. No app, no calibration, no learning curve.
Pick Your Color — Silver, Yellow, Or Red
Same scanner, three finishes. Choose your variant above and add to cart — every WallScout™ HW-710 ships with our 30-day "find it or refund it" guarantee. If the HW-710 doesn't catch what's behind your walls, send it back and we'll refund every cent.
Original: $39.99
-70%$39.99
$12.00Description
Stop Drilling Blind. Start Drilling Smart.
Pinpoint studs, live AC wires, copper pipes, and rebar before your drill bit hits them. The WallScout™ HW-710 reads through drywall, plaster, and concrete so you know exactly what's behind the wall — no more praying, no more "I hope this isn't a wire."
5 Scan Modes In One Pocket-Sized Tool
One scanner. Four buttons. Five different things to find behind your wall. Switch modes with a single press and let the LCD tell you exactly where to stop drilling.
➤ Locks Onto Center, Not The Edge: The bar graph fills as you scan and snaps to "CENTER" the moment you're directly over a stud or pipe. Mark, drill, done.
➤ AC Live-Wire Alert Up To 51mm: A flashing warning and audible beep fire the second the sensor crosses an energized cable up to 2 inches deep. No more praying you missed the romex.
➤ Reads Wood, Metal & Rebar Separately: Three depth settings for wood (13mm, 25mm, 38mm) plus a dedicated metal mode that finds rebar, nails, and copper up to 38mm in concrete or drywall.
The Repair Bill You're About To Avoid
Every DIYer has a story about the wire they didn't see coming. Or the pipe. Or the rebar that snapped a $40 masonry bit. The HW-710 ends the guessing — sweep the wall, watch the bar, listen for the beep, and know what's there before metal meets surface.
"Hung my first floating shelf last weekend and the AC alarm went off right where I was about to drill. Pulled the cover plate off — live wire, two inches over. This thing paid for itself on the first hole." — Mark T.
Audio Beep + Bar Graph = Zero Second-Guessing
The HW-710 doesn't make you read tea leaves. The LCD bar fills as you approach a stud, locks onto "CENTER," and the speaker beeps the second you're dead-on. Even if your eyes are on the drill, your ears will hear it.
Why DIYers Trust The WallScout™ HW-710
✓ One Tool, Five Jobs: Replaces a stud finder, a live-wire detector, and a metal scanner — for the price of one.
✓ Reads Through Drywall, Plaster & Concrete: Works on standard interior walls and reinforced masonry up to 51mm deep.
✓ Pocket-Sized & One-Hand Operated: 15cm tall, 4 buttons, no app, no Bluetooth, no calibration menu — pull it out and scan.
Drill Holes With Confidence — On Every Surface
Mounting a TV bracket. Hanging a heavy mirror. Running a new outlet. Every job that ends with a drill in your hand starts with the same question: what's behind this wall?
The HW-710 answers it in three seconds. Press a button, glide it across the surface, watch the bar, mark the spot.
Then drill — knowing exactly what you'll hit, and what you'll never have to fix.
| Capability | WallScout™ HW-710 | Cheap Stud Finders |
|---|---|---|
| Detects Live AC Wires Up To 51mm | ✅ | ❌ |
| Wood + Metal + AC In One Tool | ✅ | ❌ |
| LCD Depth Read + Audio Beep + Center Lock | ✅ | ❌ |
What Makes The HW-710 Different?
- 5 Dedicated Scan Modes: ½" stud, 1" stud, 1½" stud, metal (38mm), and AC current (51mm) — switched with a single button.
- "CENTER" Lock Indicator: The bar graph snaps to center the instant you're over the target so you mark the right spot the first time.
- Triple-Alert System: LCD bar + percentage readout + audio beep — see it, read it, hear it.
- Built For Real Jobs: Rubberized side grip, recessed display, and a battery compartment that swaps in 30 seconds.
Drill Smarter, Not Riskier
Hang Anything, Anywhere
TVs, mirrors, shelves, art — find the stud, hit it dead-center, and skip the drywall anchors that pull out at 5kg.
Avoid Live Wires Before You Cut
Adding an outlet, running cable, fishing wire? AC mode flashes the warning before you commit a single hole.
Find Pipes Before The Flood
Metal mode picks up copper plumbing in walls and floors so a kitchen reno doesn't turn into an insurance claim.
Locate Rebar In Concrete
Drilling masonry? Find the rebar before it snaps your bit. Detection up to 38mm deep through concrete.
One-Hand Operation
15cm × 6.7cm × 3cm — fits in any tool pouch. Four buttons total. No app, no calibration, no learning curve.
Pick Your Color — Silver, Yellow, Or Red
Same scanner, three finishes. Choose your variant above and add to cart — every WallScout™ HW-710 ships with our 30-day "find it or refund it" guarantee. If the HW-710 doesn't catch what's behind your walls, send it back and we'll refund every cent.
