MoldClearPro™ — Erase Black Mold From Silicone, Grout & Rubber Seals In Hours
Stop Scrubbing Black Mold That Always Comes Back — Wipe It Out Once
You've bleached the silicone, scrubbed the grout, sprayed the gasket — and three weeks later the black is back. MoldClearPro™ is a thick yellow gel that clings to vertical seals, sinks into porous grout and rubber, and breaks the colony down at the root so it stops crawling back next month.
Why Sprays and Bleach Stop Working By Day Three
Liquid sprays drip off vertical seals before they can do anything. Bleach lifts the surface stain but doesn't touch the colony hiding inside the rubber and silicone pores. So you scrub for an hour, the bathroom reeks like a pool, and by Wednesday the black spots are creeping back.
➤ Clings instead of drips: The thick gel sticks to washing-machine gaskets, shower silicone and vertical grout lines so it actually has time to work — no runs, no waste.
➤ Sinks past the surface: Sodium hypochlorite plus mildew and corrosion inhibitors penetrate porous seals and grout, breaking down the colony underneath instead of just bleaching the top.
➤ Precision tip, no scissors needed: Unscrew the cap, point the applicator at the exact crack, lay a clean bead. No spray mist drifting through the bathroom, no overshoot onto the towels.
How One Application Does What Three Bleach Sessions Couldn't
Most cleaners get one shot — you spray, wait two minutes, wipe, and whatever didn't reach the colony survives. MoldClearPro™ stays put for 3 to 5 hours. The gel doesn't slide off the seal. It sits there and the active ingredients work the whole time.
That's why a single bead on a black washing-machine gasket lifts overnight — instead of needing weekly scrub sessions that wear out the rubber and your wrists.
Why Renters, Homeowners and Cleaning Pros Reach for It First
After bleach sprays, vinegar baths and three different "miracle" cleaners that did nothing, customers tell us the same thing — they finally got the silicone back to white and didn't have to scrub for an hour to do it. "I'd basically given up on the washer gasket. Left it on overnight, wiped it down, and it actually worked." — Megan T.
Get Your Seals, Grout and Gaskets Back to White
✓ Black lifts off silicone, grout and rubber: Watch the stain rise overnight on the spots that used to need a toothbrush and a fresh bottle of bleach every weekend.
✓ One application holds the line: The protective layer slows mold from creeping back into the same seal three weeks later — so cleaning day stays cleaning day.
✓ No bleach-fume headaches: The thick gel stays exactly where you put it instead of misting through the bathroom — no holding your breath, no opening windows in winter.
Banish Mold in 3 Easy Steps
Step 1: Unscrew the precision tip and lay a clean bead of MoldClearPro™ directly along the moldy seal, grout line or rubber gasket — narrow cracks, vertical surfaces, and tight corners get the same exact dose.
Step 2: Walk away. Let the gel sit for 3–5 hours so it sinks past the surface and breaks down the colony underneath, where sprays never reach.
Step 3: Wipe with a damp cloth. Watch black stains lift off the silicone, grout and rubber — then enjoy seals that stay clean instead of crawling back next week.
| MoldClearPro™ | Bleach Spray | Scrub & Hope |
|---|---|---|
| ✅ Penetrates silicone, grout & rubber gaskets | ❌ Surface stain lift only | ❌ Black returns within days |
| ✅ Stays put 3–5 hours on vertical seals | ❌ Drips off before working | ❌ Wears down rubber and grout |
| ✅ Targeted bead, no fumes drifting through the room | ❌ Mist fills the bathroom | ❌ Spores stay in the seal |
Specifications for Those Who Want the Details
- Volume: 3.4 fl oz
- Works on: Washing machine gaskets, refrigerator door seals, tile grout, silicone bathroom seals, kitchen sink edges, window & door rubber seals, wash basins, toilets, ceramic tile
- Active ingredients: Deionized water, sodium hypochlorite, sodium hydroxide, germicide, mildew & corrosion inhibitors
- Application: Unscrew tip (no scissors required), apply directly, let sit 3–5 hours, wipe clean with a damp cloth
- Safety: Keep out of reach of children and pets; use in a ventilated area; rinse hands after use
Got Questions? We've Got the Answers
Will it really get the black off my washing-machine gasket?
This is one of the toughest spots — the rubber is porous and traps spores. Lay a thick bead, leave it 3–5 hours, then wipe. Heavy buildup may need a second pass.
Is it safe to use with kids and pets in the house?
The formula uses sodium hypochlorite — keep out of reach of children and pets, ventilate the room, and rinse hands after use. Once wiped clean and dry, surfaces are safe to touch.
Will it bleach or damage my grout, silicone or paint?
Used as directed on tile, grout, silicone and rubber, it cleans without lifting color. Avoid fabrics, unsealed wood, and surfaces that can corrode.
How fast do I see results?
Most surface mold lifts in 3–5 hours. Deep stains in old silicone or rubber may need a second application — you'll see the gel turning grey as it breaks the colony down.
Does the smell linger after I wipe?
There's a clean chlorine note while the gel works — that's normal. Wipe down, ventilate, and the smell clears within an hour.
Backed by Our Mold-Free Promise
If MoldClearPro™ doesn't lift the black off your silicone, grout or washing-machine gasket, send us a photo and we'll make it right — refund, replacement, your call. Mold keeps coming back. Confidence in your cleaner shouldn't have to.
Stop Scrubbing Black Mold That Always Comes Back — Wipe It Out Once
You've bleached the silicone, scrubbed the grout, sprayed the gasket — and three weeks later the black is back. MoldClearPro™ is a thick yellow gel that clings to vertical seals, sinks into porous grout and rubber, and breaks the colony down at the root so it stops crawling back next month.
Why Sprays and Bleach Stop Working By Day Three
Liquid sprays drip off vertical seals before they can do anything. Bleach lifts the surface stain but doesn't touch the colony hiding inside the rubber and silicone pores. So you scrub for an hour, the bathroom reeks like a pool, and by Wednesday the black spots are creeping back.
➤ Clings instead of drips: The thick gel sticks to washing-machine gaskets, shower silicone and vertical grout lines so it actually has time to work — no runs, no waste.
➤ Sinks past the surface: Sodium hypochlorite plus mildew and corrosion inhibitors penetrate porous seals and grout, breaking down the colony underneath instead of just bleaching the top.
➤ Precision tip, no scissors needed: Unscrew the cap, point the applicator at the exact crack, lay a clean bead. No spray mist drifting through the bathroom, no overshoot onto the towels.
How One Application Does What Three Bleach Sessions Couldn't
Most cleaners get one shot — you spray, wait two minutes, wipe, and whatever didn't reach the colony survives. MoldClearPro™ stays put for 3 to 5 hours. The gel doesn't slide off the seal. It sits there and the active ingredients work the whole time.
That's why a single bead on a black washing-machine gasket lifts overnight — instead of needing weekly scrub sessions that wear out the rubber and your wrists.
Why Renters, Homeowners and Cleaning Pros Reach for It First
After bleach sprays, vinegar baths and three different "miracle" cleaners that did nothing, customers tell us the same thing — they finally got the silicone back to white and didn't have to scrub for an hour to do it. "I'd basically given up on the washer gasket. Left it on overnight, wiped it down, and it actually worked." — Megan T.
Get Your Seals, Grout and Gaskets Back to White
✓ Black lifts off silicone, grout and rubber: Watch the stain rise overnight on the spots that used to need a toothbrush and a fresh bottle of bleach every weekend.
✓ One application holds the line: The protective layer slows mold from creeping back into the same seal three weeks later — so cleaning day stays cleaning day.
✓ No bleach-fume headaches: The thick gel stays exactly where you put it instead of misting through the bathroom — no holding your breath, no opening windows in winter.
Banish Mold in 3 Easy Steps
Step 1: Unscrew the precision tip and lay a clean bead of MoldClearPro™ directly along the moldy seal, grout line or rubber gasket — narrow cracks, vertical surfaces, and tight corners get the same exact dose.
Step 2: Walk away. Let the gel sit for 3–5 hours so it sinks past the surface and breaks down the colony underneath, where sprays never reach.
Step 3: Wipe with a damp cloth. Watch black stains lift off the silicone, grout and rubber — then enjoy seals that stay clean instead of crawling back next week.
| MoldClearPro™ | Bleach Spray | Scrub & Hope |
|---|---|---|
| ✅ Penetrates silicone, grout & rubber gaskets | ❌ Surface stain lift only | ❌ Black returns within days |
| ✅ Stays put 3–5 hours on vertical seals | ❌ Drips off before working | ❌ Wears down rubber and grout |
| ✅ Targeted bead, no fumes drifting through the room | ❌ Mist fills the bathroom | ❌ Spores stay in the seal |
Specifications for Those Who Want the Details
- Volume: 3.4 fl oz
- Works on: Washing machine gaskets, refrigerator door seals, tile grout, silicone bathroom seals, kitchen sink edges, window & door rubber seals, wash basins, toilets, ceramic tile
- Active ingredients: Deionized water, sodium hypochlorite, sodium hydroxide, germicide, mildew & corrosion inhibitors
- Application: Unscrew tip (no scissors required), apply directly, let sit 3–5 hours, wipe clean with a damp cloth
- Safety: Keep out of reach of children and pets; use in a ventilated area; rinse hands after use
Got Questions? We've Got the Answers
Will it really get the black off my washing-machine gasket?
This is one of the toughest spots — the rubber is porous and traps spores. Lay a thick bead, leave it 3–5 hours, then wipe. Heavy buildup may need a second pass.
Is it safe to use with kids and pets in the house?
The formula uses sodium hypochlorite — keep out of reach of children and pets, ventilate the room, and rinse hands after use. Once wiped clean and dry, surfaces are safe to touch.
Will it bleach or damage my grout, silicone or paint?
Used as directed on tile, grout, silicone and rubber, it cleans without lifting color. Avoid fabrics, unsealed wood, and surfaces that can corrode.
How fast do I see results?
Most surface mold lifts in 3–5 hours. Deep stains in old silicone or rubber may need a second application — you'll see the gel turning grey as it breaks the colony down.
Does the smell linger after I wipe?
There's a clean chlorine note while the gel works — that's normal. Wipe down, ventilate, and the smell clears within an hour.
Backed by Our Mold-Free Promise
If MoldClearPro™ doesn't lift the black off your silicone, grout or washing-machine gasket, send us a photo and we'll make it right — refund, replacement, your call. Mold keeps coming back. Confidence in your cleaner shouldn't have to.
Original: $19.99
-70%$19.99
$6.00Description
Stop Scrubbing Black Mold That Always Comes Back — Wipe It Out Once
You've bleached the silicone, scrubbed the grout, sprayed the gasket — and three weeks later the black is back. MoldClearPro™ is a thick yellow gel that clings to vertical seals, sinks into porous grout and rubber, and breaks the colony down at the root so it stops crawling back next month.
Why Sprays and Bleach Stop Working By Day Three
Liquid sprays drip off vertical seals before they can do anything. Bleach lifts the surface stain but doesn't touch the colony hiding inside the rubber and silicone pores. So you scrub for an hour, the bathroom reeks like a pool, and by Wednesday the black spots are creeping back.
➤ Clings instead of drips: The thick gel sticks to washing-machine gaskets, shower silicone and vertical grout lines so it actually has time to work — no runs, no waste.
➤ Sinks past the surface: Sodium hypochlorite plus mildew and corrosion inhibitors penetrate porous seals and grout, breaking down the colony underneath instead of just bleaching the top.
➤ Precision tip, no scissors needed: Unscrew the cap, point the applicator at the exact crack, lay a clean bead. No spray mist drifting through the bathroom, no overshoot onto the towels.
How One Application Does What Three Bleach Sessions Couldn't
Most cleaners get one shot — you spray, wait two minutes, wipe, and whatever didn't reach the colony survives. MoldClearPro™ stays put for 3 to 5 hours. The gel doesn't slide off the seal. It sits there and the active ingredients work the whole time.
That's why a single bead on a black washing-machine gasket lifts overnight — instead of needing weekly scrub sessions that wear out the rubber and your wrists.
Why Renters, Homeowners and Cleaning Pros Reach for It First
After bleach sprays, vinegar baths and three different "miracle" cleaners that did nothing, customers tell us the same thing — they finally got the silicone back to white and didn't have to scrub for an hour to do it. "I'd basically given up on the washer gasket. Left it on overnight, wiped it down, and it actually worked." — Megan T.
Get Your Seals, Grout and Gaskets Back to White
✓ Black lifts off silicone, grout and rubber: Watch the stain rise overnight on the spots that used to need a toothbrush and a fresh bottle of bleach every weekend.
✓ One application holds the line: The protective layer slows mold from creeping back into the same seal three weeks later — so cleaning day stays cleaning day.
✓ No bleach-fume headaches: The thick gel stays exactly where you put it instead of misting through the bathroom — no holding your breath, no opening windows in winter.
Banish Mold in 3 Easy Steps
Step 1: Unscrew the precision tip and lay a clean bead of MoldClearPro™ directly along the moldy seal, grout line or rubber gasket — narrow cracks, vertical surfaces, and tight corners get the same exact dose.
Step 2: Walk away. Let the gel sit for 3–5 hours so it sinks past the surface and breaks down the colony underneath, where sprays never reach.
Step 3: Wipe with a damp cloth. Watch black stains lift off the silicone, grout and rubber — then enjoy seals that stay clean instead of crawling back next week.
| MoldClearPro™ | Bleach Spray | Scrub & Hope |
|---|---|---|
| ✅ Penetrates silicone, grout & rubber gaskets | ❌ Surface stain lift only | ❌ Black returns within days |
| ✅ Stays put 3–5 hours on vertical seals | ❌ Drips off before working | ❌ Wears down rubber and grout |
| ✅ Targeted bead, no fumes drifting through the room | ❌ Mist fills the bathroom | ❌ Spores stay in the seal |
Specifications for Those Who Want the Details
- Volume: 3.4 fl oz
- Works on: Washing machine gaskets, refrigerator door seals, tile grout, silicone bathroom seals, kitchen sink edges, window & door rubber seals, wash basins, toilets, ceramic tile
- Active ingredients: Deionized water, sodium hypochlorite, sodium hydroxide, germicide, mildew & corrosion inhibitors
- Application: Unscrew tip (no scissors required), apply directly, let sit 3–5 hours, wipe clean with a damp cloth
- Safety: Keep out of reach of children and pets; use in a ventilated area; rinse hands after use
Got Questions? We've Got the Answers
Will it really get the black off my washing-machine gasket?
This is one of the toughest spots — the rubber is porous and traps spores. Lay a thick bead, leave it 3–5 hours, then wipe. Heavy buildup may need a second pass.
Is it safe to use with kids and pets in the house?
The formula uses sodium hypochlorite — keep out of reach of children and pets, ventilate the room, and rinse hands after use. Once wiped clean and dry, surfaces are safe to touch.
Will it bleach or damage my grout, silicone or paint?
Used as directed on tile, grout, silicone and rubber, it cleans without lifting color. Avoid fabrics, unsealed wood, and surfaces that can corrode.
How fast do I see results?
Most surface mold lifts in 3–5 hours. Deep stains in old silicone or rubber may need a second application — you'll see the gel turning grey as it breaks the colony down.
Does the smell linger after I wipe?
There's a clean chlorine note while the gel works — that's normal. Wipe down, ventilate, and the smell clears within an hour.
Backed by Our Mold-Free Promise
If MoldClearPro™ doesn't lift the black off your silicone, grout or washing-machine gasket, send us a photo and we'll make it right — refund, replacement, your call. Mold keeps coming back. Confidence in your cleaner shouldn't have to.
